Register info for all registered configuration registers. The format for each entry is (offset, name, size, write-mask).
The 64 PCI configuration registers, each 32 bits in size.
The 'Control Status' register
ROM object, map size, and map function number for the Expansion ROM.
Device used fast status posting of interrupts
List of attached fc-disks. (Loop id and object.)
Set to 1 if a firmware has been downloaded to the controller.
Current state of the firmware
The 'Host Control' register
State of the interrupt pin.
Obsolete - used for checkpoint compatibility.
List of io-requests that are handled by the controller and waiting to be sent back to the host as completed.
The 'Interrupt Control' register
The 'Interrupt Status' register
Last accessed bios address
The loop id of the controller itself, on the FC-AL
List of input mailboxes
List of output mailboxes
List of all current PCI IO and memory mappings.
Index of the next free I/O request.
Node name of device
State machine info for nvram control
The PCI bus this device is connected to, implementing the pci-bus interface.
Port name of device
Address to start of request queue
Length of request queue
Address to start of response queue
Length of response queue
The 'Semaphore' register
Write masks for all registered configuration registers. The format for each entry is (offset, mask).
|info||print information about the device|
|pci-header||print PCI device header|
|status||print status of the device|