THE FHC Board Status Register.
The FHC Control Register
The FHC ECC Register.
The FHC ID Register
List of all other fhc devices in the system
The FHC Reset Control Register
The FHC Interrupt Group Number Register.
The interrupt bus object used to send and receive interrupts.
List of names of all the interrupts.
The FHC jtag Control Register.
The FHC jtag Command Register.
List of current input level for all interrupt sources. If level is set, theinput line is still raised.
The module id of the fhc device.
List of current state for all interrupt sources.
List of 'TID' (target id) for all interrupt sources.
List of valid bits for all interrupt sources.
The linux 2.4 kernels doesn't enable serial interrupt properly during boot. Setting this attribute will work around it by never allowing the serial interrupt to be disabled.
|info||print information about the device|