The contents of the (4 * 1024) bytes of extended RAM.
Current hour [0,23].
Status of the interrupt pin.
Device to send interrupts to, implementing the simple-interrupt.
Level at which interrupts are sent.
Time of last PIE interrupt in simulator time.
Current day of the month [1,31].
Current minute [0,59].
Current month [1,12].
Next NVRAM address to be accessed.
The contents of the non-volatile storage, as a list of 128 bytes.
The contents of the non-volatile storage in bank1, as a list of 64 bytes.
Time between periodic interrupts, in microseconds
Current second [0,59].
Current time-of-day, counted in seconds.
Simulated time in seconds at last update.
Set to 1 if time register were modified while SET = 1.
Current year (full four-digit format).
|cmos-base-mem||deprecated — set base memory size|
|cmos-boot-dev||deprecated — set boot drive|
|cmos-century||deprecated — set date century|
|cmos-extended-mem||deprecated — set extended memory size|
|cmos-floppy||deprecated — set floppy parameters|
|cmos-hd||deprecated — set fixed disk parameters|
|cmos-info||deprecated — print information about the CMOS area|
|cmos-init||deprecated — initialize some CMOS values|
|get-date-time||get date and time|
|info||print information about the device|
|set-date-time||set date and time|
|status||print status of the device|
|trace-nvram||trace nvram updates|