Index in command queue for next command to issue.
List of commands that are queued for the disk.
Buffer with data to transfer.
The length of data to transfer.
Name of the Fibre Channel controller that this disk is connected to.
Index in command queue for next free slot.
The geometry of the disk. ()
Name of the image object holding the actual data of the disk. This object must implement the 'image' interface.
The last SCSI command sent to the disk
Loop ID on the FC-AL.
Mode pages for the disk.
Model name of the disk.
Unique name of the node, as 48 bit IEEE address
The constant delay, in nanoseconds, for a disk transfer. This delay will be added to the size-dependent delay set by the 'ns_per_unit' attribute. Note that this is not the same as average seek time for random accesses. (This attribute will be replaced by a more detailed timing model in the future.)
The number of nanoseconds it takes to transfer data of the size set in the 'timing_unit_size' attribute. This delay will be added to the constant delay set in the 'ns_per_transfer' attribute. (This attribute will be replaced by a more detailed timing model in the future.)
Unique name of the port, as 48 bit IEEE address
Length of SCSI command queue (not implemented).
Revision string of the disk.
Pseudo attribute returning the SCSI command name (as a string) given an integer index representing the command.
Can be used to access a sector (512 bytes) on the disk.
Number of sectors read in the current simulation session.
Number of sectors written in the current simulation session.
Current Sense Key code.
The amount of data (in bytes) that makes up a 'unit'. A unit is used to calculate disk delays together with the 'ns_per_unit' attribute. (This attribute will be replaced by a more detailed timing model in the future.)
List of active transfer buffers for data message and status.
Vendor name of the disk.
Vendor Specific string for the disk - often used as serial id.
VPD pages for the disk.
|add-sun-partition||add partition from a file|
|create-sun-vtoc-header||write a new VTOC to a Sun disk|
|create-sun-vtoc-partition||write partition data in the VTOC on a Sun disk|
|delete-sun-vtoc-partition||delete partition data from the VTOC on a Sun disk|
|dump-sun-partition||write partition as a file|
|info||information about current state of the fibre-channel disk|
|print-sun-vtoc||print the VTOC for a Sun disk|