If 1, the flash device will handled inquiries as normal accesses. If 0, it will ignore them.
Should be set to 1 for AMD devices that ignore the address offset for commands.
Set to 1 if the flash memory supports the AMD command interface.
Bus width (in bytes)
Set to 1 if the flash memory supports the common flash interface (CFI).
The data structure (as a byte array) that will be read on CFI "query" operations.
Command set as specified by the JEDEC standard. Either a number (such as 0x0001) or a string (such as "intel/sharp extended").
Current address in pending write/erase operations.
Current byte/word count in pending write/erase operations.
Set to 1 for Intel compatible devices (means that the device supports an Intel command set, and that the CFI query command isn't address sensitive).
Interleave (number of parallel flash memory chips).
Set to 1 if the flash memory is JEDEC compatible.
Internal state - the current operation mode.
Set to 1 in order to reset the device.
Sector size (applicable to AMD compatible devices).
Number of sectors (applicable to AMD compatible devices).
RAM object providing the backing store area.
Data in a pending write-to-buffer operation.